Motorcycle Audio

  • Master Card
  • Visa
  • Discover
  • American Express
  • PayPal Credit
  • PayPal

Text or Call: 1-800-358-0881

JMC ROKKER® COMPLETE Audio KIT w/200w RMS Amp 6.58” Spkrs & 200w RMS Sub Vanderhall Roadster
JMC ROKKER® COMPLETE Audio KIT w/200w RMS Amp 6.58” Spkrs & 200w RMS Sub Vanderhall Roadster

JMC ROKKER® COMPLETE Audio KIT w/200w RMS Amp 6.58” Spkrs & 200w RMS Sub Vanderhall Roadster

Your Price: $1,999.99
In Stock.
Part Number:XXRK-400SPSB-VHL
  • Amplifier Output Power:400w RMS total (100w x 2) + 200w RMS Powered Subwoofer
  • Amplifier Class:Class D properly shielded against FM interference
  • External Dimensions:6 ½ x 4 ¾ x 1 ¾
  • Speaker Size:6.58” (in.) Diameter
  • Cone Construction:Black Glass-Fiber
  • Tweeter Type:PEI Dome High-Output
  • Frequency Response:35-23kHz
  • Subwoofer Frequency Response:20-150Hz
  • Sensitivity:91 db
  • Magnet Material:Lightweight Neodymium
  • Impedance:2 Ohms
  • Maximum Power:200 Watts
  • RMS Power:130 Watts
  • Weather Resistant:Yes
  • OEM Size Match:Yes
  • Comparision Rating:ROKKER speakers and amplifiers provide the most significant increase in volume and overall fidelity compared to stock Vanderhall or Fosgate
This complete custom speaker/amp installation kit has been designed for the Vanderhall 3-wheel Roadster and is 100% plug-n-play into the electrical system.

ROKKER speakers are spec'd at 2 ohms impedance and 200 watts maximum input (130w RMS - 91db sensitivity), these speakers provide excellent on-highway performance.

Speaker drivers feature lightweight waterproof woven-fiber cones with super-rigid metal basket and a high-density lite-weight Neodymium magnet structure with integral high-output PEI tweeters.

Mounting hole pattern and spade electrical connections are exactly the same as the factory specification, this is a total plug-and-play no-modification solution complete with easy to follow installation instructions.

The ROKKER 2-channel 200w amplifier kit has been designed for use in the Vanderhall Roadster.

This is a full range class D amplifier and is spec’d at 100watts RMS per channel X2 channels, (200w total) driven continuous into a 2 ohm load @ 14.4vdc.

Amplifier mounts into the same location as the stock amp and connects to the on-board Bluetooth powered audio controller.

Kit also includes a 200w RMS self-powered subwoofer that is mounted in the very back of the rear storage compartment for deep throbbing bass response to further enhance the overall audio experience.

Custom made plug-n-play wiring harnesses are included with this complete audio kit, top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation and tuning instructions.

Amplifier itself measures 6 1/2” X 4 ¾“ X 1 ¾”.