Motorcycle Audio

  • Master Card
  • Visa
  • Discover
  • American Express
  • PayPal Credit
  • PayPal

Text or Call: 1-800-358-0881

JMC ROKKER® Series Audio KIT w/200w RMS Amp & 6.58” Fairing Speakers for 1998-2013 Harley StreetGlide/Ultra/Tri-Glide
JMC ROKKER® Series Audio KIT w/200w RMS Amp & 6.58” Fairing Speakers for 1998-2013 Harley StreetGlide/Ultra/Tri-Glide

JMC ROKKER® Series Audio KIT w/200w RMS Amp & 6.58” Fairing Speakers for 1998-2013 Harley StreetGlide/Ultra/Tri-Glide

Your Price: $799.99
In Stock.
Part Number:RPKT-200HC13
  • Amplifier Output Power:200w RMS total (100w x 2) into 2-ohms at 14.4vdc
  • Amplifier Class:Class D properly shielded against FM interference
  • External Dimensions:6 ½ x 4 ¾ x 1 ¾
  • Speaker Size:6.58” (in.) Diameter
  • Cone Construction:Black Glass-Fiber
  • Tweeter:PEI Dome High-Output
  • Frequency Response:35-23kHz
  • Sensitivity:91 db
  • Magnet Material:Lightweight Neodymium
  • Impedance:2 Ohms
  • Maximum Power:200 Watts
  • RMS Power:130 Watts
  • Weather Resistant:Yes
  • Comparision Rating:ROKKER speakers and amplifiers provide the most significant increase in volume and overall fidelity compared to stock Harley and/or Fosgate.
Drag Specialties - Parts Unlimited
#4405-0852

This complete custom speaker/amp installation kit has been designed for the 1998-2013 Harley® StreetGlide, Ultra, ElectraGlide or Tri-Glide fairing.

ROKKER speakers are spec'd at 2 ohms impedance and 200 watts maximum input (130w RMS - 91db sensitivity), these speakers provide excellent on-highway performance.

Speaker drivers feature lightweight waterproof woven-fiber cones with super-rigid metal basket and a high-density lite-weight Neodymium magnet structure with integral high-output PEI tweeters.

Top-quality speaker grills, adapter rings and bracket hardware are included for secure and clean mounting into the 98-13 Harley fairing and are designed to utilize the old or new designs of the Harley inside-fairing metal-brackets.

Mounting hole pattern and spade electrical connections are exactly the same as the factory specification, this is a total plug-and-play no-modification solution complete with easy to follow installation instructions.

The new ROKKER 2-channel 200w amplifier has been design specifically for use in the 1998-2013 Harley® StreetGlide/Ultra/ElectraGlide/TriGlide fairing with the Harley HK Radio, Harley RSI radio and Jensen, Aquatics or Fosgate replacement HD radios with direct RCA-RCA connections.

This is a full range class D amplifier and is spec’d at 100watts RMS per channel X2 channels, (200w total) driven continuous into a 2 ohm load @ 14.4vdc.

Amplifier mounts to the top of the custom made stainless steel bracket system, which has the slots in the bottom section to properly relocate 2 of the Harley CB, MP3 or XM sat radio modules, if installed. (will mount by Velcro (without the bracket) to the top of the 1998-2005 Harley RSI radio)

Custom made plug-n-play wiring harnesses/RCA-RCA direct cable adapters are included with this complete audio kit, top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation instructions.

Amplifier itself measures 6 1/2” X 4 ¾“ X 1 ¾”.

ROKKER speakers and amplifiers provide the most significant increase in volume and overall fidelity compared to stock Harley and/or Fosgate.

HC13-6582TW-XRP

JMRA-2000HC06